Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

Since its launch in 1963, the Carrera collection from pioneering Swiss watchmaker TAG Heuer has been accelerating its efforts to lead the modern avant-garde watchmaking world with its racing chronographs. The Carrera has won acclaim for its aggressive design and reliability. Today, let’s take a closer look at one of the most handsome TAG Heuer Carrera chronographs replicas on the market, TAG Heuer Carrera Chronograph 43mm black dial watch replica CBG2010.FT6143.


The TAG Heuer Carrera Heuer-02 watch replica uses the same skeleton dial design introduced in the original 45mm Carrera Heuer-01 back in 2015. Those themes were extended to a 43mm Carrera Heuer-01 Skeleton range, which the new model effectively replaces. As you can see in the image below, with the exception of the revised dial layout required by the change in movement (moving to a more classic 3-6-9), the two watches are very similar.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

The stainless steel case with brushed sides gives the watch a rugged and sporty look. The watch replica has a diameter of 43 mm, making it suitable for people with thick wrists.

The watch is also equipped with a fixed tachymeter bezel made of ceramic, which is highly resistant to scratches. Black PVD-coated steel crown and cylindrical chronograph pushers on the side.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

The TAG Heuer Carrera Chronograph watch imation features an avant-garde openworked dial. The minutes counter at 3 o’clock and the hours counter at 9 o’clock, both with rhodium-plated snailed rings and red chronograph hands, the center hand also in red, are clearly visible, while the small seconds counter at 6 o’clock is distinguished from the chronograph counter by a black snailed ring and polished rhodium-plated hands.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

This is a TAG Heuer chronograph fake whose thoroughly modern styling bears more than a glancing likeness to the Hublot Big Bang, with its futuristic, modular construction. Interesting to note that while the TAG Heuer Modular Connected can be disassembled by hand and reconfigured by the owner to have different lugs, say, or a mechanical watch head, this watch is modular in the sense that TAG Heuer can easily create variations in the product line by substituting different materials for lugs, case, etc. The wearer cannot play with it in the same way. 


Developed as the Calibre 1888, launched as the Calibre 1969 before being re-launched as the Calibre CH-80, the movement finally was launched as a mainstream production movement when it powered last year’s Heuer Autavia Heuer-02.

The caseback is back-to-back and houses the Tag Heuer in-house Heuer 02 automatic chronograph movement with a diameter of 31 mm and 33 jewels, made up of 168 components, a column wheel and a vertical clutch. It beats at a frequency of 28,800 vibrations per hour (4 Hz), offers a power reserve of 80 hours and is water-resistant to 100 meters.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica


Brand: TAG Heuer

Model: TAG Heuer Carrera Heuer 02 watch replica

Reference Number: CBG2010.FT6144: black dial and brown leather strap; CBG2011.FC6430: blue dial and blue leather strap; CBG2051.FC6426: pink gold lugs and bezel;CBG2016.FT6161: carbon lugs and bezel; CBG2090.BH0661: full ceramic; CBG2A1Z.BA0658: 45mm version with GMT function

Diameter: 43mm (45mm for GMT)

Case Material: Varies by reference, but includes steel, gold, carbon, and full ceramic options

Dial Color: Blue or black skeleton dial

Indexes: Rhodium-plated, black gold or 5N pink gold-plated hour and minute hands and indexes with white or black Super-LumiNova

Lume: Yes

Water Resistance: 100 meters

Strap/Bracelet: Rubber, brown leather and rubber, steel or matte black ceramic with S-shaped links, blue alligator leather and rubber, or matte black alligator leather and rubber. Folding buckle in steel, PVD-covered steel or Grade 2 titanium with double safety push-buttons and TAG Heuer logo.

The Movement: Heuer 02 Automatic Chronograph

Functions: Hours, minutes, seconds, date, chronograph (one version with GMT)

Diameter: 32mm

Power Reserve: 75 hours

Winding: Automatic

Frequency: 4 Hz (28,000 vph)

Chronometer Certified

More information, please visit our latest replica TAG Heuer watch listing, we are selling almost all model AAA grade 1 :1 cloned TAG Heuer watches.

Review the TAG Heuer Monza Calibre 17 Chronograph Replica

TAG Heuer had announced the 2016 TAG Heuer Monza Calibre 17 Chronograph black dial watch replica CR2080.FC6375 to mark the 40th anniversary of the first Monza series back in 1976.

TAG Heuer had announced the 2016 TAG Heuer Monza Calibre 17 Chronograph black dial watch replica CR2080.FC6375 to mark the 40th anniversary of the first Monza series back in 1976. The lineage of the 2016 Monza can be traced back to three time-honored watches, namely the single-push Heuer Chronograph (unnamed) Monza in the 1930s, Monza in Carrera in 1976 and TAG Heuer Monza in 2000 ( Tag Heuer Monza), whose design is based on the former’s design while retaining the latter’s name. It may be a complicated genealogy, but most importantly, Monza is one of the best TAG Heuer designs in the past 20 years, so this is a very gratifying return.

Ferrari’s 1975 World Championship

The original TAG Heuer Monza replica was launched in 1976 to commemorate Niki Lauda’s 1975 World Championship win. While the Brabham team started the year as favourites for the title, Lauda had a new weapon at his disposal- the 312T Ferrari, which was light years ahead of the previous season’s 312B3. In fact, the 312T formed the basis for every Ferrari F1 challenger through to 1981, when the Flat 12 cylinder was replaced by the 1.5ltr turbo of the Ferrari 126.

Lauda won five races throughout the season and fittingly sealed his first drivers title at the Italian Grand Prix in September 1975. The team also won the Constructors Championship for the first time since 1964, a feat they would repeat in 1976, 1977 and 1979.

1975 Niki Lauda and Ferrari at MonacoSo, Niki Lauda’s first world title and the first constructor’s title in almost a decade for Ferrari was enough of a reason to celebrate, and of course it was the first World Championship for the team since Heuer joined as a sponsor in 1971. It was time for a special edition watch to mark the occasion.

Review the TAG Heuer Monza Calibre 17 Chronograph Replica

Heuer Monza 1976

The TAG Heuer Monza 1976 replica was based on the second generation Carrera case, but with a black coating applied via PVD and a Black and Red colour scheme. There were several versions of the Monza, which stayed in the Heuer catalogue through to the early 1980s, all of which you can read about here.

Review the TAG Heuer Monza Calibre 17 Chronograph Replica

The Dial

Good news for fans of the retro look – the Monza is back. Good news for racing fans, too, with a design that’s just as dynamic and full of automotive references as the original version from 1976. It’s also remarkable, since TAG Heuer has experimented over the last 15 years with a more elegant version with no black coating and colorless dial elements. A glance at the new Monza Calibre 17 replica might call to mind the familiar roar of Formula 1 engines. After all, the watch was first introduced to celebrate Ferrari’s World Championship title in 1975. 

Review the TAG Heuer Monza Calibre 17 Chronograph Replica

The Case

The new TAG Heuer Monza replica combines the best features of two historical models – its dial design can be traced back to the original Monza from the year 1976 and its case to a Heuer chronograph from 1933. The cushion-shaped case is a style holdover from the earliest days of the watch. The Monza from the 1970s had an oval case shape that was typical for that time and was available in chrome-plated or black-coated brass. That watch replica contained Calibre 15, which necessarily placed the crown on the left-hand side. Calibre 15 was the successor model of the Calibre 11 developed in 1969 by Heuer-Leonidas in collaboration with Breitling, Hamilton-Büren and Dubois Dépraz – one of the world’s first automatic chronographs.

The Movement

Calibre 15 had a small seconds subdial set at 10 o’clock that gave the original Monza a strikingly asymmetrical look. TAG Heuer replica omitted this daring design element for its newest version, due in part to its use of the ETA 2894, known at TAG Heuer as Calibre 17. The ETA 2894 is a modular chronograph based on the three-hand caliber ETA 2892, so the crown sits lower on the case than the chronograph pushers. Although the pushers are generously sized, their pressure point is not perfect. The start-stop pusher on our test watch had a notably delayed reaction when timing events. The stop and reset worked better but the pusher function was stiff. This is due at least in part to the cam control of the chronograph that replaces the historical, higher-quality column-wheel control in more economical chronograph movements.

Review the TAG Heuer Monza Calibre 17 Chronograph Replica

The rate results of the test watch are generally acceptable. However, the timing machine recorded an outlier in the “dial down” position, which negatively affected the average outcome on our stringent rate test. On the positive side was the low daily gain of 2.5 seconds per day without the chronograph on and 4.5 seconds per day while running. The wearing test on the wrist showed deviations ranging between 0 and +6 seconds per day.

Just as before, the Monza has a sealed caseback – even though the technology beneath is in no way so unattractive that it must be hidden. TAG Heuer replica uses the basic movement quality “Elaboré” and adds various decorative finishes and an individualized rotor. Black enhanced engraving instead of gold on the oscillator fits the overall sporty design of the watch.

All in all, these changes benefit the new Monza, giving it a sporty and relaxed look that is not quite so idiosyncratic as the original. Whatever it may lose in coolness, it gains with the polished and matte finishes of the cushion-shaped case. Titanium contributes to its excellent wearing comfort and the titanium carbide coating makes it highly resistant to scratches.

The Strap

The perforated calfskin strap is also perfectly in line with the automotive appeal of the Monza design, as are the sporty case and dashboard-like displays. The strap ends in a functional, well-executed folding clasp with push-buttons that are also made of PVD-coated titanium. Its clamp-type clasp mechanism allows for precise adjustment. It compresses the strap at the point of closure, though not to the extent seen on similar clasps.


Reference number: CR2080.FC6375

Functions: Hours, minutes, small seconds, chronograph with 30-minute counter, date

Movement: ETA 2894 “Elaboré,” automatic, 28,800 vph, 37 jewels, hack mechanism, quick date adjustment, fine regulator, Incabloc shock absorber, power reserve = 42 hours, diameter= 28 mm, height = 6.1 mm

Case: Titanium-carbide-coated titanium, curved sapphire crystal on both sides, titanium-carbide-coated titanium screwed caseback with four screws, water resistant to 100 m

Strap and clasp: Calfskin strap with PVD- coated titanium safety folding clasp

Rate results (deviations in seconds per 24 hours, with chronograph switched off/on)

More information, please visit our latest replica TAG Heuer watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.