TAG Heuer Aquaracer x Bamford Titanium 43 mm Watch Replica Review

TAG Heuer is celebrating Jack Heuer’s 88th birthday with a limited edition Carrera – I think it’s TAG Heuer’s last LE of the season… TAG Heuer’s long-running and globally popular diver’s watch collection has just been awarded the ” Bamford treatment”, so this limited edition of 1,500 TAG Heuer Aquaracer x Bamford Titanium watch replica WAY208F.BF0638 is undoubtedly the most chic of all.


The Case & Dial

The case itself is 43mm in diameter, but thanks to shortened lugs it should wear reasonably well for its size. This new TAG Heuer Aquaracer Bamford LE replica have a Tropical Coffee Dial with orange accents, a concentric patterned black dial, and a case made from grade 2 titanium. The grade 2 titanium means it will be hypoallergenic and corrosion resistant.

The dial features concentric circles emanating from the center that are recessed into the dial. Printed crosshairs split the dial into quadrants, with a date aperture at 3 o’clock, and branding at 12 and 6 o’clock. The hour makers are simple blocks of lume, doing away with the highly polished and beveled markers seen on other replica TAG Heuer Aquaracer models. Minutes and seconds are marked in hashes between the hours, and at their outset are a track of orange markers laid out perpendicular to the hour markers. The markers run the width of every other second, and while they add a visual flair to the dial, I can’t imagine they serve any practical function. The tip of the seconds hand also features alternating white and orange sections, while the hour and minute hand are outlined in orange. The end result is a highly legible dial that reads straightforward, even with the embellishments. 


The Movement

Inside the TAG Heuer Aquaracer replica WAY208F.BF0638 is the TAG Heuer Caliber 5 automatic movement. This is a base Swiss Made Sellita SW200 or ETA 2824 mechanism. The Caliber 5 operates at 4Hz with about two days of power reserve. On the rear of the titanium case is a diving helmet motif. I’ve always found this amusing because the Aquaracer has always been associated with “fast” activities such as boating, surfing, and swimming. I’ve don’t think there are too many instances of people wearing diving helms doing anything fast — outside of sinking to the floor.


The Bracelet

The TAG Heuer Aquaracer Bamford replica features a titanium case and bracelet that’s been sandblasted to a uniform texture throughout. The metal takes on a warm tone that plays well with the angular case of the Aquaracer. The deployant has a stamped metal diver’s extension. Eventually, I’m sure the Aquaracer will get an updated deployant with a micro-adjust system. I also think that this watch would look really sharp on a dark gray NATO-style strap.

The Basics

Brand: TAG Heuer

Model: Aquaracer Bamford Limited Edition

Reference Number: WAY208F.BF0638

Diameter: 43mm

Case Material: Grade 2 Titanium

Dial Color: Black

Indexes: Rectangular markers

Lume: Yes

Water Resistance: 300m

Strap/Bracelet: Bracelet

The Movement: Calibre 5 Automatic

Functions: Hours, minutes ,seconds, date

Diameter: 25.6mm

Power Reserve: 42 hours

Winding: Automatic

Frequency: 4Hz

Jewels: 25

Chronometer Certified: No


Price for the TAG Heuer Aquaracer x Bamford watch is $3,900 USD, a bit on the premium side ($1,150 more than the stock steel Aquaracer), but it is still in the affordable zone for the target demographic for sure.

More information, please visit our latest replica TAG Heuer watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

Launch of the new TAG Heuer Monaco Heuer 02 Black Dial 39 mm Watch Replica

Luxury Swiss watchmaker TAG Heuer has launched three new models in the Monaco collection, replica TAG Heuer Monaco Heuer 02 39 mm watch (ref. CBL2113), continuing a new chapter in the collection that began in 2019, a year that marks the 50th anniversary of the iconic Monaco collection and is therefore celebrated with a series of special editions. The Calibre Heuer 02 movement is a strikingly personalized design. All three models are inspired by the iconic 1970s model, two of which are fitted with a specially redesigned, modern metal bracelet. This bold and eye-catching style is what makes the Monaco a timeless timepiece, not just a legacy, but a meaningful one.


The TAG Heuer black-dial Monaco has been the mainstay of the TAG Heuer Monaco copy collection since its relaunch, but those models were traditionally black dials with black registers and white or steel hands. The black-with-red colour scheme first appeared in 2009 with the Monaco Racing model. Know by collectors as the “Black McQueen”, the Monaco Racing was one of two Calibre 12 black dial Monaco Chronographs.

As you can see below, the new TAG Heuer Monaco Heuer 02 replica is a direct descendent of the Monaco Racing, albeit with a three-register layout and the updated dial design.



The highlight of the new TAG Heuer model replica is the striking black sunburst dial. The opposite model has a brilliant blue sunburst dial and a red-white-blue color scheme reminiscent of the original Monaco timepiece from 1969. The new model features a stainless steel bracelet, a striking square counters at 3 and 9 o’clock, and a red central chronograph seconds hand. The black dial version is also available with a black leather strap.

The dial continues with the three register layout of the new copy TAG Heuer Heuer 02 collection, with running seconds at 6 o’clock with the crosshair pattern rather than a full white register.


The 39 mm diameter steel square case is polished and fine-brushed to give the watch a muted, understated color while remaining robust and scratch-resistant.

On the other side of the case, there are two chronograph pushers, the upper one for start/pause and the lower one for return to zero.



Likewise, there are no changes at the rear of the watch, which sports a circular sapphire window, showing off the Heuer 02 movement. The shape mimics the original vintage Monaco, which featured a prominent circular section in the centre of the caseback, albeit without a sapphire crystal.



The steel bracelet is one of the features that make the new replica TAG Heuer Monaco 39mm collection stand out. It has been almost twenty years since the Monaco was last offered with a metal bracelet. This particular model was inspired by the H-shaped bracelet used in the Monaco in the early 1970s. The designers wanted to give the 2020 model a new character, and ultimately found inspiration in the collection of the Tag Heuer Museum in La Chaux-de-Fonds. They redesigned the original steel bracelet to meet today’s standards and to improve wearing comfort.

“The bracelet is particularly important for any watch, If the bracelet is not good enough, the timepiece will not be as attractive as it could be,” said Catherine Eberlé-Devaux, Tag Heuer Heritage Director. In our new Monaco timepieces, we have echoed the glorious history of the watch with familiar designs and colors, while emphasizing that the collection is moving forward with innovative technology.” says Catherine Eberlé-Devaux, Tag Heuer’s Heritage Director. 



Model Name: TAG Heuer Monaco Black Dial Heuer 02 Chronograph replica

Watch Reference Number: CBL2113

Strap Reference Code: BA0644 (bracelet)

FC6177 (black leather strap)

Case Material: Stainless Steel

Case Diameter: 39mm x 39mm

Water Resistance: 100m

Movement: Calibre Heuer 02


In recent years, vintage chronographs have been a hot trend in the watch market, and both the original Monaco auction models of the last century and the new vintage models on sale today have attracted the attention of many chronograph lovers. Looking for a TAG Heuer watch replica, click here. We are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

Inspired by Ayrton Senna TAG Heuer launches two new Ayrton Senna Formula 1 replica watches

TAG Heuer is proud to present the Tag Heuer Formula 1 Senna 2020 Special Edition replica, in both automatic and quartz chronograph versions, as a tribute to Ayrton Senna and as a further sign of the friendly partnership between the two companies – a tribute that can be described as One of the most remarkable partnerships in sport. Throughout his career, as a long-time partner of Tag Heuer, Senna has not only broken countless racing records and embodied every word that represents the sport: speed, bravery, greatness, but has also redefined the meaning of the word “driving”. 


Considered one of the best drivers of all time, Ayrton Senna exemplifies the quest for excellence and performance. Fast and fearless, the Brazilian driver never stopped pushing the limits of what was possible, delivering dramatic and exciting race after race. In order to showcase the legendary driver’s personal speed record of 340 km/h and to inspire today’s drivers to push the limits of the sport, the new Special Edition features a ceramic bezel with a tachymeter scale of 400 km/h. The details of the design are distinctive and unique. This unique design detail sets these Seine-inspired timepieces apart from other replica Tag Heuer F1 watches, whose bezels typically have a maximum tachometer scale of 240 km/h. The new special edition features a ceramic bezel with a tachometer scale of 400 km/h. The new bezel has been designed in such a way that it will be able to be worn on the wrist for a long time. No team has yet reached the 400 km/h speed limit in motorsport, but they are getting closer to it every season. The story of Ayrton Senna continues to convey Tag Heuer’s pioneering spirit and has inspired the brand to create bold timepieces, including this year’s special edition.

Bianca Senna, CEO of Senna Brands and niece of Ayrton Senna, has praised the design of the Tag Heuer Formula 1 Senna 2020 Special Edition replica. The 2020 Special Edition replica is inspired by Ayrton’s commitment to pushing the boundaries. Every year, we are actively involved in the creation of the new Tag Heuer timepiece, which, with its 400 km/h tachometer scale, highlights the relentless pursuit of seemingly unattainable speeds. This is part of the story of the Elton legend, and it continues to inspire Tag Heuer’s commitment to creating the ideal timepiece.


Ayrton Senna Formula 1 replica watches

The 2020 Tag Heuer F1 Seine 44 mm Calibre 16 Chronograph replica CAZ201B features a robust, anthracite-coloured, sun-brushed dial with shimmering black “azurage” counters for the minutes, hours and fixed seconds. The rhodium-plated applied hour markers and hands are coated with white Super-LumiNova® luminescent paint, ensuring that the time is readable at a glance, at any speed and in any light.

Ayrton Senna Formula 1 replica watches

This luxurious and sporty timepiece is mounted on a black calfskin strap with black lining and Seine-yellow stitching, echoing the yellow elements that adorn the dial, the date window, around the bezel, the upper pushers and the crown. The S-shaped embossed motif on the bracelet pays homage to Senna while recalling the shape of his favourite Tag Heuer steel bracelet links. The steel folding clasp is equipped with a double security system and an extended clasp, making it easy to wear with racing suits. The watch is powered by a Calibre 16 automatic movement and the Senna logo is engraved on the steel screw-down case back.


The Tag Heuer F1 Serna 2020 Special Edition replica CAZ101AF is also available with a quartz movement, an exemplary example of the power and influence of sport. The Tag Heuer F1 Senna 2020 quartz 43 mm Special Edition watch replica features a sun-brushed anthracite dial with luminescent black counters at 3, 6 and 9 o’clock. The fixed bezel is made of hard-wearing black ceramic, as in the version equipped with Calibre 16, and the dial and bezel are adorned with yellow elements, a recognisable colour scheme that links the watch to Senna.

Ayrton Senna Formula 1 replica watches

The case and the screw-down case back with a special Senna engraving are made of steel. In keeping with the previous Senna Special Edition timepieces, the steel bracelet features the iconic double S links, providing ideal wearing comfort for both everyday use and on the track.

Ayrton Senna Formula 1 replica watches


The 2020 TAG Heuer Formula 1 Senna Special Edition collection starts at US$2,100 for the Quartz chronograph on the Link-style bracelet, with the Calibre 16 on the leather strap costing US$3,200.

As the latest model, we are designing, If you are interested in TAG Heuer watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

TAG Heuer has released TAG Heuer Carrera Sport Chronograph 160 Years Special Edition 44 MM Watch Replica

To celebrate its 160th anniversary this year, TAG Heuer has released a series of limited edition tributes to one of its most popular models, the Carrera, in recognition of the unforgettable iteration of the collection. This new, limited edition collection of TAG Heuer Carrera Sport Chronograph 160 Years Special Edition 44mm watch replica (ref. CBN2A1D.BA0643) combines the brand’s modern sporty look, inspired by the iconic 1965 Heuer Carrera Dato 12, to create a classic balance between old and new, resulting in a unique and timeless sporty watch look.

44 MM Case

The stainless steel case of the TAG Heuer Carrera Chronograph 160 Years replica  more or less follows the standard production of the Carrera Sport Chronograph series. Although the 44mm case size sounds thick and heavy on paper, the short lugs and clever case side geometry make the case size much smaller than the digital display. The iconic inward-inclined lugs of the Carrera series appear here, and the modernist piston buttons also appear here. The black embellishment brings greater visual contrast. The ceramic tachometer bezel is also used, and it appears black or dark blue depending on the dial. The sapphire display case back has received a special limited edition serial number engraving, but retains the 100-meter water resistance of the standard Carrera sports chronograph.

TAG Heuer Carrera Sport Chronograph 160 Years Special Edition 44mm watch replica

Panda Dial

The real point of departure from previous models for the new TAG Heuer Carrera Sport Chronograph replica is the dial, which is designed to evoke the 1965 Heuer Carrera Dato 12. The Dato 12 was the first production wrist chronograph to feature a turning date disc, and to emphasize this first Heuer’s designers placed the date window at the unorthodox 12 o’clock position and rendered the date numerals in eye-catching bright red. The Carrera Sport Chronograph 160 Years Special Edition mirrors this signature touch with a 12 o’clock date window of its own, and looks to further emulate vintage Carreras with its panda dial layout and host of subtle vintage inspired touches. 

TAG Heuer Carrera Sport Chronograph 160 Years Special Edition 44mm watch replica

It’s here where the two colorways of the Carrera Sport Chronograph 160 Years Special Edition replica diverge. The first is a white dial variant CBN2A1D.BA0643 with a subtle circular grained finish and a matching raised rehaut for the seconds track. The most eye-catching elements here are the black chronograph subdials, featuring raised sloping outer lips and azurage for greater light play along with contrasting red segments on the 3 o’clock chronograph minutes subdial. This red accent is echoed in the central chronograph seconds hand, tying the elements together well and creating a dramatic visual highlight, while the running seconds subdial at 6 o’clock fades into the background somewhat thanks to its light markings and white subdial surface. 

The second variant CBN2A1E.BA0643 of the replica Carrera Sport Chronograph 160 Years Special Edition is a touch more colorful, with a cobalt blue circularly brushed main dial and white subdials. The red accents and de-emphasized funning seconds subdial of the white dial version are echoed here, but this blue dial model changes the overall balance of the dial thanks to its sharply contrasting white rehaut. This band of white between the main dial and the bezel helps to visually break up the profile of the design, and while it’s difficult to tell through initial images this will likely aid this version to wear a bit smaller on the wrist than its white dial counterpart.

TAG Heuer Carrera Sport Chronograph 160 Years Special Edition 44mm watch replica

Calibre Heuer 02

Under the hood you’ll find the Calibre Heuer 02, TAG Heuer’s go-to in-house chronograph movement with column wheel and vertical clutch. It’s a movement that was first announced back in 2013 as the cal. 1969 before being paused and brought back in a big way for the launch of 2017’s Autavia Heritage Calibre Heuer 02 replica. The Heuer 02 has so far proven to be a sturdy chronograph movement that offers good performance and an impressive value for money.

TAG Heuer Carrera Sport Chronograph 160 Years Special Edition 44mm watch replica

The Basics

Brand: TAG Heuer

Model: The TAG Heuer Carrera Sport Chronograph 160 Years Special Edition

Reference Number: CBN2A1D.BA0643 (white circular brushed dial), CBN2A1E.BA0643 (blue circular brushed dial)

Diameter: 44mm

Case Material: Stainless steel

Dial Color: Blue or white

Indexes: Rhodium-plated applied indexes with white Super-LumiNova

Lume: Super-LumiNova

Water Resistance: 100 meters

Strap/Bracelet: Stainless-steel H-shaped bracelet

The Movement: Calibre Heuer O2 Automatic

Functions: Hours, minutes, small seconds, chronograph, date at 12 o’clock

Diameter: 32mm

Power Reserve: 80 hours

Winding: Automatic

Frequency: 28,800 vph

Jewels: 33

Price: $5,950

Limited Edition: Each version is limited to 1,860 pieces and says, on its caseback, “ONE OF 1860.”

As the latest model, we are designing, if you are interested in TAG Heuer watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

Review the First Gold Monaco – TAG Heuer Monaco 18ct Yellow Gold Chronograph Replica

Everyone knows that a sports watch should be made of steel. It’s not just a matter of aesthetics, but also practicality-stainless steel is harder than most precious metals, including 18-karat gold, which means your steel sports watch is less likely to be scratched and damaged than the equivalent gold. But there’s something special about the TAG Heuer Monaco 18ct Gold chronograph replica CW5140, the Monaco case is perhaps the sportiest of TAG Heuer’s classic chronographs, and its large, square case, already conspicuous, is made even more so by the square case made of gold.

The Story

While there were Gold Carreras and an Autavia in Heuer’s historic catalogue, there was never a Gold Monaco. It wasn’t until 2002, some 5 years after TAG Heuer revived the Monaco that the first Gold Monaco replica was launched. The watch featured in the 2002 and 2003 catalogues, before being replaced in 2004 by the Monza Calibre 36 Rose Gold.

If we turn to the 2002 Price List, we can see that the Monaco was priced at £6500 in the UK, and in fact was one of the less expensive gold models, given that others such as the 2000 and 6000 series also featured a gold bracelet. So why this interest in Gold?

When Jean-Christophe Babin arrived as the new TAG Heuer CEO in 2001, part of his mission was to elevate the brand in the eyes of consumers. He was determined to bring back TAG Heuer’s reputation for innovation and precision, projects that began to emerge in 2005 with the launch of the Calibre 360 movement. But projects like the Calibre 360 take time and know-how, and when it came to making movements, TAG Heuer had no in-house knowledge of mechanical movements, having relied on Lemania and ETA/ Valjoux since the 1980s. So how could the brand be pushed up-market ahead of the technical cavalry arriving? The answer was precious metals.

From 2001, TAG Heuer released Gold versions of many of the main model lines- 2000, 6000, Alter Ego, Monaco, Monza, Carrera and Autavia. The Monaco Gold collection replica consisted of a single Calibre 17 reference (CW5140) replica, although there was also a limited run of around 15 watches of a White Gold Monaco, reference CW5141.


The TAG Heuer Monaco 18K Gold replica (18K being 75% pure Gold and 25% alloys such as zinc or copper) used the same basic design as the standard steel Monaco of the day, reference CW2111, but with a few key differences in detailing to set the flagship Monaco apart from its steel brethren.

The dial

The dial is quite different to that offered on the steel Monaco of the day, and is a wonderful star-burst silver colour. The hands and applied hour-markers are Gold, giving the watch a luxurious rather than sporty look. And speaking of those hour markers, they are significantly longer than those used on the steel Monaco.

The watch uses a TAG Heuer rather than Heuer logo- it’s often forgotten that LVMH phased out the use of the Heuer logo from around 2002, only reprising it again in 2010 with the 300 SLR. All Monaco/ Carrera/ Monza/ Autavia from this era are branded as TAG Heuers.

The Case

Well, ref CW5140 replica is a solid 18ct yellow gold cased (38 mm x 38 mm x 13 mm) Monaco chronograph with “cushion” angled pushers. The dial is 18 ct silvered gold and has 3 sub registers at 3,6, and 9 (but not picked out in another colour), plus a date window at 6. It has baton type hands and gold indexes. The hands are lumed, as are the tips of the indexes. All is covered by a quite pronounced Plexiglass crystal.


The piece is powered by the automatic calibre 17 (which is an ETA 2894-2 movement with a chronograph module) which beats at 28,800 vph (4hz) and has 37 rubies. The power reserve is some 42 hours and water resistance is to 30 m. This movement is COSC chronometer rated. A large gold rotor dominates the movement, and has some nice Cotes de Geneve decoration.

The case back is solid (pity) and notes usual brand information – along with reference and serial numbers, plus 18 ct gold hallmark.

On www.replicawatchreport.co/, we can offer all kind AAA replica tag heuer monaco watches such like Monaco Concept 24,Monaco V4,Monaco 24,made of full stainless steel, the case has polishing and brushing craft,look high end and all details is 1:1.the movement is high quality Asian clone quartz movement to make sure all functions work and stable.

Quality Sports Chronographs – the New TAG Heuer Carrera 160th Anniversary 42mm Heuer 02 Steel Watch Replica

This year, TAG Heuer is celebrating its 160th anniversary, and to celebrate this occasion, the brand is bringing the new TAG Heuer Carrera 42mm Heuer 02 steel replica (Reference: CBN2011.BA0642) to young people who love life. Let’s take a closer look at this extraordinary creation. There are four TAG Heuer Carrera chronograph replica watches in the new range- stainless steel models with a blue, black or anthracite dial and a stainless steel model with rose gold dial highlights and a silver dial. And we’ll be talking about dials quite a lot in this review, because the dials on the new Carrera series are perhaps the most beautiful that TAG Heuer has produced in recent years. 

New TAG Heuer Carrera 160th Anniversary 42mm Heuer 02 Steel Watch Replica


As any fan of the vintage Carrera will tell you, the classic TAG Heuer Carrera replica has three key attributes- it’s modestly sized, it has a simple, highly legible dial and finally, it doesn’t have an external bezel. Back in the 1960s, it was the Autavia range that had an external bezel- not the Carrera. This changed in 2005 when TAG Heuer launched the first Carrera with an external bezel, and some 15 years later, the external bezel is a common feature of many Carrera replica models.

From a design perspective, the replica TAG Heuer Carrera Elegant series follows the style of the Carrera 1887, the 41mm Chronograph launched in 2010. When the Calibre 1887 movement was phased out in 2018, TAG Heuer replaced this watch with a Calibre 16 Carrera, also in a 41mm case with the same 12-6-9 layout.


The Newcomer shares the same basic case design as the TAG Heuer Carrera Sport copy watch, but in a smaller 42mm diameter. What this means is a case that keeps the traditional Carrera look, but with re-profiled lugs that flow around the case and a slimmer, re-profiled mid-section. The result is a case with thickness of 14.4mm, meaningfully less than the outgoing watch, which was 15.9mm. The 160 Years Silver and Montreal editions are 14.7mm, despite being 39mm diameter cases. The reduced thickness makes the 1mm increase in diameter easier to accept- but yes, it would have been even better if TAG Heuer had held the case dimensions at 41mm, but we can live with the increase, which really isn’t noticeable on the wrist.

One of the highlights of the watch’s design is its sleek, rounded steel bezel without tachymeter scale, reinterpreting the elegant simplicity of the design aesthetic of the original Tag Heuer Carrera replica launched in 1963. On the other side are the cylindrical steel chronograph pushers and the crown, with the upper chronograph pushers activating the \pause chronograph hand and the lower chronograph pushers operating the zero function.

New TAG Heuer Carrera 160th Anniversary 42mm Heuer 02 Steel Watch Replica


While the replica Carrera Sport introduced a circular brushed pattern to the dial, the Elegant series uses two styles of dial- two sunray dials and two opaline dials. The blue and anthracite dials are a return to TAG Heuer’s classic “sunray” dials, made by ArteCad, the TAG Heuer-owned dial manufacturer. It’s worth saying again: these are perhaps the most beautiful dials that we can remember from TAG Heuer.

While blue-dial watches have been all the rage over the last five years, TAG Heuer continues to “do blue” better than most. There’s a fantastic depth to the blue colour, which works beautifully with the silver finishing on the dial and case. While there is no blue leather strap option (yet) for this watch, we think it would look more sporty on a calfskin strap.

The black and silver dial models use glossy opaline dials, adding a different look to the sunray duo, and working especially well on the silver dial which is complemented by rose gold (plated) detailing on the dial. Like the Carrera Sport, the Elegant uses the newly designed hour-markers and a new serif font for the Carrera printed script on the dial, which evolves the classic Carrera font of the 1960s.

New TAG Heuer Carrera 160th Anniversary 42mm Heuer 02 Steel Watch Replica

While the TAG Heuer watch replica has three registers, in the usual Heuer 02 “3-6-9” positions- it follows the replica Monaco Heuer 02 in having prominent 9 and 3 0’clock registers, but no defined register at 6 o’clock for the sweeping seconds. Instead, there is the crosshair pattern, again inspired by Heuer’s dials of the 1970s. The effect of this is that the watch looks like it has two registers, with the third only becoming apparent on close inspection. We asked Guy Bove about this choice and why not simply have three registers of the same look and size.

The crosshair was used quite frequently in Heuer times so it is fully in line with our DNA and it also serves to reduce attention on the running second while keeping it present for those who want to check precision/ running. In contrast with our Sport collection, we wanted to highlight the bi-compax look here and go to a more dashboard-style look for the Sport collection with three subdials. Finally, we have the hands, which are the same style as the replica Carrera Sports series.

All up, these dials look fantastic- still a Carrera, but with enough detailed touches to set the new series from the previous series. We’ll again bore regular readers by pointing that that these dials would look even better with only two registers, dropping the sweeping seconds hand, but we’re sure that marketing would have something to say about a watch that didn’t have any obvious moving hand.

The chronograph pushers and crown are also new and a different design to those featured on the Carrera Sport replica and a nice improvement on those found on the Calibre 16 Carrera that this new watch replaces.


A nice surprise with the new series is the new bracelet- essentially, a more refined, slimmer version of the existing H-Link bracelet. Again, we asked Guy Bove to tell us the story of the new bracelet:

”The bracelet is still an H-design but for the Elegant collection we created a more seamless flow between strap and case and between the strap links to highlight the case itself and the dial, whereas the Sport has a more technical look and a thicker strap to highlight its sense of power. This logic will continue.“ Guy Bove- TAG Heuer Creative Director

The bracelet feels good on the wrist- lighter than the H-Link bracelet and arguably more comfortable. The bracelet has a double-push clasp (see below) and a nice combination of brushed and polished surfaces.


The sapphire glass caseback reveals the beauty of the movement. Inside is the Tag Heuer Calibre Heuer 02, a complex and innovative in-house chronograph movement entirely made by the brand, composed of 168 components, equipped with all the column wheels and vertical clutch of a fine chronograph and with a power reserve of up to 80 hours when fully wound.

New TAG Heuer Carrera 160th Anniversary 42mm Heuer 02 Steel Watch Replica


The new series is priced as US$5,350 for the black, blue and anthracite dial models (black and blue on a bracelet; anthracite on a leather strap), while the silver-dial watch with rose gold highlights is US$5,500, meaning that all models are a few hundred dollars less than the larger Carrera Sports range.

Inspired by the spirit of the original racing timepieces, the Tag Heuer Carrera Chronograph replica combines elegance and sporting dynamism to create a timepiece for today’s young man. As the latest model, we are designing. More information, please visit our latest replica Tag Heuer watch listing, we are selling almost all model AAA grade 1 :1 cloned Tag Heuer watches.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

Since its launch in 1963, the Carrera collection from pioneering Swiss watchmaker TAG Heuer has been accelerating its efforts to lead the modern avant-garde watchmaking world with its racing chronographs. The Carrera has won acclaim for its aggressive design and reliability. Today, let’s take a closer look at one of the most handsome TAG Heuer Carrera chronographs replicas on the market, TAG Heuer Carrera Chronograph 43mm black dial watch replica CBG2010.FT6143.


The TAG Heuer Carrera Heuer-02 watch replica uses the same skeleton dial design introduced in the original 45mm Carrera Heuer-01 back in 2015. Those themes were extended to a 43mm Carrera Heuer-01 Skeleton range, which the new model effectively replaces. As you can see in the image below, with the exception of the revised dial layout required by the change in movement (moving to a more classic 3-6-9), the two watches are very similar.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

The stainless steel case with brushed sides gives the watch a rugged and sporty look. The watch replica has a diameter of 43 mm, making it suitable for people with thick wrists.

The watch is also equipped with a fixed tachymeter bezel made of ceramic, which is highly resistant to scratches. Black PVD-coated steel crown and cylindrical chronograph pushers on the side.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

The TAG Heuer Carrera Chronograph watch imation features an avant-garde openworked dial. The minutes counter at 3 o’clock and the hours counter at 9 o’clock, both with rhodium-plated snailed rings and red chronograph hands, the center hand also in red, are clearly visible, while the small seconds counter at 6 o’clock is distinguished from the chronograph counter by a black snailed ring and polished rhodium-plated hands.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica

This is a TAG Heuer chronograph fake whose thoroughly modern styling bears more than a glancing likeness to the Hublot Big Bang, with its futuristic, modular construction. Interesting to note that while the TAG Heuer Modular Connected can be disassembled by hand and reconfigured by the owner to have different lugs, say, or a mechanical watch head, this watch is modular in the sense that TAG Heuer can easily create variations in the product line by substituting different materials for lugs, case, etc. The wearer cannot play with it in the same way. 


Developed as the Calibre 1888, launched as the Calibre 1969 before being re-launched as the Calibre CH-80, the movement finally was launched as a mainstream production movement when it powered last year’s Heuer Autavia Heuer-02.

The caseback is back-to-back and houses the Tag Heuer in-house Heuer 02 automatic chronograph movement with a diameter of 31 mm and 33 jewels, made up of 168 components, a column wheel and a vertical clutch. It beats at a frequency of 28,800 vibrations per hour (4 Hz), offers a power reserve of 80 hours and is water-resistant to 100 meters.

Review the TAG Heuer Carrera Chronograph 43mm Black Dial Watch Replica


Brand: TAG Heuer

Model: TAG Heuer Carrera Heuer 02 watch replica

Reference Number: CBG2010.FT6144: black dial and brown leather strap; CBG2011.FC6430: blue dial and blue leather strap; CBG2051.FC6426: pink gold lugs and bezel;CBG2016.FT6161: carbon lugs and bezel; CBG2090.BH0661: full ceramic; CBG2A1Z.BA0658: 45mm version with GMT function

Diameter: 43mm (45mm for GMT)

Case Material: Varies by reference, but includes steel, gold, carbon, and full ceramic options

Dial Color: Blue or black skeleton dial

Indexes: Rhodium-plated, black gold or 5N pink gold-plated hour and minute hands and indexes with white or black Super-LumiNova

Lume: Yes

Water Resistance: 100 meters

Strap/Bracelet: Rubber, brown leather and rubber, steel or matte black ceramic with S-shaped links, blue alligator leather and rubber, or matte black alligator leather and rubber. Folding buckle in steel, PVD-covered steel or Grade 2 titanium with double safety push-buttons and TAG Heuer logo.

The Movement: Heuer 02 Automatic Chronograph

Functions: Hours, minutes, seconds, date, chronograph (one version with GMT)

Diameter: 32mm

Power Reserve: 75 hours

Winding: Automatic

Frequency: 4 Hz (28,000 vph)

Chronometer Certified

More information, please visit our latest replica TAG Heuer watch listing, we are selling almost all model AAA grade 1 :1 cloned TAG Heuer watches.

Review the TAG Heuer Monaco V4 Phantom 41mm Watch Replica

Review the TAG Heuer Monaco V4 Phantom 41mm Watch Replica

TAG Heuer had applied the Carbon Matrix Composite (CMC) technology first developed in 2013 to one of its iconic watches with this new model- the TAG Heuer Monaco V4 Phantom 41mm watch replica WAW2091.FC6369. TAG Heuer was introducing the Monaco V4 Phantom watch replica at Baselworld 2015, which features a carbon fiber case and bridge.

Carbon Matrix Composite

So what’s so special about the TAG Heuer Monaco V4 Phantom replica? We are glad you asked. You see, the carbon fiber used in the TAG Heuer Monaco V4 Phantom replica watch is a special kind called Carbon Matrix Composite (CMC), and not only is the case made out of this new material, but the seven bridges of its movement are made using CMC too. CMC is formed using a special technique where carbon fibers are placed in a certain direction in the mould and micro-blasted to give it an orderly elegant look that TAG Heuer calls “matte black vertical brushed.” This is obvious if one looks closely at the movement bridges that form the dial. The choice of material is not just for looks; by using carbon fiber for all the main components, the TAG Heuer Monaco V4 Phantom replica is also light. Furthermore, the extensive use of carbon fiber also encapsulates the essence of this watch very nicely as it was inspired by motor-racing and engines.


The Dial

Admiring the dial, the stealth-like mien is clear to see. The “Phantom” soubriquet proves an apt nomenclature for this watch, which pairs black and gray hues to eye-catching effect. The hands are faceted, satin-finished with titanium carbide coating and anthracite-gray SuperLuminova.

The dial is sparsely populated with few hour markers, the showcasing of various movement components taking precedence. The rubies that are visible from the front of the watch deliver small pockets of red, enlivening the otherwise covert character of the watch. However, despite the dark persona of the TAG Heuer Monaco V4 replica, and unlike some other “phantom”-style dials, this one remains eminently simple to read. Style has not been embraced at the expense of functionality here.


The case and movement

The case dimensions are 41 mm x 41 mm and I found the TAG Heuer Monaco watch imation accorded a comfortable fit. To be honest, this surprised me. While I did not envision the scale of the watch to prove problematic, I did wonder whether the V-shaped caseback would appear stand-offish. Rest assured, the watch nuzzles the wrist nicely and felt very at home on my hirsute arm.


The caseback features three sapphire crystal panes. Two of these reveal the barrels and belt drives, while the third one reveals the linear mass, running on a straight rail. This latter aspect is subject to patents and provides a further point of differentiation from the conventional, rotational oscillating mass. In marketing parlance, the phrase “unique selling proposition” is often employed and TAG Heuer always seem to be looking for numerous means of making its products stand out from the crowd. However, as a glutton for innovation, I am grateful for the Swiss brand’s strategy.

While there is no arguing this is a neoteric horological creation, TAG Heuer has not eschewed traditional craftsmanship. The wheels that are visible from the front of the watch are circular satin-brushed. Indeed, close examination of the Monaco V4 Phantom reveals its exacting creation.


After 10th anniversary Monaco V4 Tourbillon, the new models returns to the traditional V4 movement: 268 components, 48 Jewels, 42 hours power reserve.

Key remarks

Model: TAG Heuer Monaco V4 Phantom

Movement: Self-winding movement; frequency = 28,800 vph (4 Hz); 48 jewels, power reserve = max. 42 hours, number of components = 268, indications = hours, minutes, small seconds

Case: CMC (Carbon Matrix Composite), dimensions 41 mm x 41 mm

Strap/Bracelet: Matt black alligator leather strap with deployant buckle and safety push-buttons with titanium carbide coating.


I admire some of TAG Heuer’s haute horlogerie creations, which enrich the field of watchmaking by showcasing the brand’s ingenuity and know-how. The TAG Heuer Monaco V4 Phantom replica continues this tradition, and its name, which stands for extraordinary “blue sky thinking”, reaffirms my high regard for this watch company.

More information, please visit our latest replica Tag Heuer watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

Review the TAG Heuer Carrera Heuer 02T 45mm Aston Martin Watch Replica

The partnership between TAG Heuer and Aston Martin began in 2018 when the two companies announced a multi-year partnership at the Geneva Motor Show that year, followed by the first watches of two co-branded chronographs – the Formula 1 and the TAG Heuer Carrera Chronograph replica. Last year saw an even more unique watch-the 2019 TAG Heuer Carrera Aston Martin DBS Superleggera watch replica.The only takeaway from this watch? You have purchased one of the 50 DBS Superleggera cars built by Aston Martin to get the watch.

In the third year of the partnership, we have something special – an Aston Martin version of the flagship TAG Heuer Carrera Heuer 02T 45mm watch replica, powered of course by the tourbillon variant of the internal Heuer 02 movement.

Review the TAG Heuer Carrera Heuer 02T 45mm Aston Martin Watch Replica


The new watch features a black, rose gold and brown colour scheme, which might not sound like a great match on paper, but work beautifully together on the wrist. The watch feels more “luxury sports” than “track day sports”, thanks to the warm tones and gold highlights.

The new TAG Heuer Carrera Heuer 02T 45mm chronograph replica is based on the 45mm Carrera Heuer 02T, meaning a modular case and allowing different materials for the centre case and lugs to be easily combined. In this instance we have a PVD-coated titanium centre case teamed with Carbon lugs. The centre case has a series of circular grooves that extend around the case, giving the watch a cool layered look, undoubtedly a design honed in the wind tunnel at Gaydon.

The other carbon element on the case is the tachymeter bezel insert (it’s a fixed bezel), which features a modern, squared-off font. Another bespoke feature of the watch is the PVD (steel) crown, which has a uniquely-patterned rubber grip. Small touches, but all important to help make this watch stand out from the many other Heuer 02T Carrera limited editions.

Review the TAG Heuer Carrera Heuer 02T 45mm Aston Martin Watch Replica


The “dial” of the TAG Heuer Carrera Aston Martin Heuer 02 replica is more a skeleton plate than a traditional dial, and features a dark brown lattice-pattern. Most of the dial detailing is Rose Gold- plated, from the Aston Martin wings that sit above the applied TAG Heuer logo, through to the hands and the hour indices. These rose gold elements contrast beautifully on the darker brown and black surfaces.

The 3 and 9 o’clock registers are ringed in rose gold, while the 6 o’clock register houses the Tourbillon regulator, which is dominated by the rose gold plated bridge.

Leather Strap

There’s only one option on the strap- a brown calfskin leather strap that complements the brown plate on the dial. The strap has a rubber lining, which feels fantastic- the combination feeling more sporty and up-market than a standard leather strap. The folding element of the clasp is made from titanium with black PVD coating, while the push-button clasp itself is made from carbon.

Review the TAG Heuer Carrera Heuer 02T 45mm Aston Martin Watch Replica


Flipping the TAG Heuer Carrera watch fake over reveals a sapphire case back, through which you’ll see the rose gold plated rotor. Much of the movement is PVD coated, allowing the rotor and the column wheel to stand out as dominant features of the movement. The black and gold theme is repeated with the text on the caseback- both the “Aston Martin Edition” script and the “1 of 150”, which denotes the number of watches being made. Yes, again these watches are not individually numbered, with all 150 watches carrying the same generic inscription.

Review the TAG Heuer Carrera Heuer 02T 45mm Aston Martin Watch Replica

On The Wrist

It’s been a while since we’ve worn the Tag Heuer Carrera Heuer 02T replica, and given that we borrowed it while using it alongside the 39mm Carrera Montreal Edition, it’s no surprise that the watch feels every 45mm on the wrist. It’s a big watch. But it doesn’t weigh much, thanks to the use of titanium and carbon.

The 2020 Carrera Aston Martin is a limited edition of 150 watches, priced as follows: Great Britain- £21,800, North America- US$26,250, Australia- A$38,050. More information, please visit our latest replica Tag Heuer watch listing, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.

Introducing the Replica TAG Heuer Formula 1 Indy 500 2020 Special Edition Quartz Chronograph

No brand has deeper or broader roots in motorsports than TAG Heuer, which is a partner throughout Formula 1, Formula E and the World Endurance Championship and maintains close sponsor relationship with the world’s most prestigious race, the Indianapolis 500. 

This year’s 104th edition of the Indianapolis 500 is full of intrigue. Originally scheduled for May 24, 2020, the race was rescheduled for August 23 due to COVID-19, but the enthusiasm behind the race is just as high. To celebrate the 104th anniversary of this historic event, the brand has produced special editions to commemorate the Indy 500 and the Indy 500. The TAG Heuer Formula 1 Indy 500 2020 Special Edition replica offers a dynamic dial treatment with textured dials and a radical modern color scheme and quartz precision.

TAG Heuer Formula 1 Indy 500 2020 Special Edition replica

The Case

The 43mm stainless steel case of the standard TAG Heuer quartz Formula 1 quartz chronograph replica forms the base for the Formula 1 Indy 500 2020 Special Edition, but TAG Heuer immediately sets this one apart visually with a stealthy bead blasted black DLC finish throughout. This matte black finish helps to alleviate some of the visual bulk of this design, while still allowing the chunky tachymeter bezel to stand out. The insert here is sandblasted black ceramic, with the Formula 1’s usual bold numerals augmented by a deep red “Indy 500” inscription at 1 o’clock. The caseback also receives a special Indy 500 engraving, but interestingly the etching still references the original cancelled date of May 24. Time will tell if this will lend these collector’s appeal down the road, but already this makes for an interesting historical oddity. Like its more common stablemates, this case is still remarkably watertight for a chronograph with a 200 meter rating.

TAG Heuer Formula 1 Indy 500 2020 Special Edition replica

The Dial

The most fascinating element of the dial for the TAG Heuer Formula 1 Indy 500 2020 Special Edition replica is not the bold and graphic color treatment, it’s the use of texture to convincingly produce the treatment’s effect. For those not in the know, the Indianapolis Motor Speedway is known to racing fans across the world as “The Brickyard” due to its original brick and mortar track surface, and while the track has long since been paved over with asphalt the start/finish line is still surrounded by a strip of bricks one yard wide as a tribute to history. One of the Indy 500’s proudest traditions is the custom of the winner kissing those bricks at the starting line after the race, adding even more mystique to that iconic strip of exposed masonry. This new Formula 1 vividly depicts that line of bricks cutting through the 3 o’clock side of the dial for a dramatic effect, but while this patterned racing stripe would be dramatic on its own the surfacing of the dial elevates it to the next level. The black main dial surface is heavily grained in a convincing depiction of asphalt, while the thicker paint on the brick stripe softens this effect somewhat for a more brick-like visual texture. It’s a dramatic visual cue that surely won’t be to everyone’s taste, but it’s a nicely rendered tribute to one of the most famous racetracks on earth. With that in mind, however, the date window at 4 o’clock may prove to be even more controversial as it drastically alters the overall visual weight distribution.

The rest of the dial design is more orthodox, with all three subdials featuring a silver azurage treatment to ensure the mostly matte watch is not completely devoid of light play at changing angles. Likewise, the tapering baton hands, and bold applied mix of indices and Arabic numerals maintain the same polished sheen as other Formula 1 iterations. The subdials themselves also harbor a few bespoke visual cues, with partial scales for both the running seconds and chronograph minutes accented in an appropriate deep shade of brick red. The 6 o’clock 1/20 second subdial adds another pop of detail and color with the finely rendered emblem of the Indianapolis Motor Speedway.

TAG Heuer Formula 1 Indy 500 2020 Special Edition replica

The Movement

TAG Heuer provides very few details surrounding the quartz chronograph movement that powers the Formula 1 Indy 500 2020 Special Edition replica. As a quartz movement though, it does offer certain advantages in accuracy and durability, even if it might lack the cache of a mechanical powerplant. In addition, this movement has proven itself reliable across much of the Formula 1 range over the past several years.

Like other Indy 500 special editions, this watch is part of the TAG Heuer Formula 1 replica collection. It features the distinctive Indianapolis Motor Speedway logo placed at the 6 o’clock subdial, which is emblemized with the words ‘INDY 500.’ 

TAG Heuer Formula 1 Indy 500 2020 Special Edition replica

The Strap

The TAG Heuer Formula 1 Indy 500 2020 Special Edition replica is paired with a rubber lined black leather rally strap. Combining the best elements of a rally and tropic strap, this is a versatile strap option that maintains the aggressive matte black color scheme with a modern motorsports twist.


The TAG Heuer Formula 1 Indy 500 2020 Special Edition is limited to 1,500 pieces and priced at $2,050. As the latest model, we are designing, if you are interested in TAG Heuer watch replica, you can pay more attention to our store, we are the largest and most reliable replica of luxury watches store, copy watches such as Rolex, Patek Phillippe, Panerai, Cartier, Hublot, IWC and more.